Hi,
I have configured my Speedtouch ST585 for Routed IP & NAT together using the advise and template from the Zen Q10766 - HOWTO: SpeedTouch 5x6/585/780WL Routed IP & NAT knowledge base article.
I can connect to the internet just fine and I can access my web server from the office using a different ISP.
The problem I am having is I can't access my webserver (which is on one of my static IPs) from my client PCs behind NAT.
I have tried temporarily disabling the firewall and there was still no change so I know it's not ports being blocked. It's more like a routing issue somewhere but I can't find out where. I have checked the subnets upon the advise from Zen tech support and they seem fine too.
I'm not sure how to display the routing table in these routers?
After configuring the router, the following information was shown. I have replaced some numbers with X's
Device:
Name ST585
Serial # 0639LT16D
Device Configuration:
Region UK
Provider Zen Internet
Service Zen (585) Routed IP & NAT Configuration
Description Routed IP and NAT
Configuration Details.:
ADSL Username zenXXXX@zen
ADSL Password ********
Multicast enabled
Local Addressing:
Enter First Local IP Address 192.168.1.64
Enter Last Local IP Address 192.168.1.253
IP address of your router. 192.168.1.254
Private Subnet Mask 255.255.255.0
Public Addressing:
Public IP address of your SpeedTouch XX.X.XX.14
Public Network XX.X.XX.8/29
Wireless Settings:
Enable Wireless enabled
Wireless Encryption WPA-PSK
Wireless Name (SSID) SpeedTouchB5E710
WPA-PSK Key XXXXXXXXXX
Any help / ideas would be much appreciated.
TIA
Regards,
/KJ